Specification:

AJ-3g786Cab is advanced WCDMA 3G network camera which can transmit live video and audio on your cell phone from anywhere in the world with infrared detection technology, means when some one moves in front of this camera it will automatically call to your mobile phone to show you the live video. It can be use in the field of security surveillance or simply as a nanny cam anytime and anywhere in the world. It does not need a computer or IP address or internet connection or any software need to install just call the sim inside the camera and see the live video on your mobile phone. as all the (IP camera needed)
This guide provides quick and safe use of steps. Please read this information before using and follow the method of operation of these guidelines to help you quickly learn the correct use of the product.

Product requirements
The product must work in 3G WCDMA network.( kindly check your country 3g network before you decide to buy 3g products)  One SIM card of 3G WCDMA must be used in this product. Location Area will need to support the WCDMA 3G network of mobile communication.

Application
1. The home or office security alarm monitoring
2. Vehicle anti-theft alarm monitoring;
3. A WCDMA network in any other region of remote monitoring, etc.
4- Pet watching, see if your pet is fine at home while you are in office J
5- Nanny watching, see if your nanny is good to your baby.

Features
1. Remote Monitoring: Anytime, anywhere voice dialing or video through dial-up connection on the device, the device can receive commands are recognized automatically after about 10 seconds to respond.

2. Automatic Voice Dial-up Alarm Intrusion: Set the IR switch to voice Dial-up alarm mode. It can automatic call the number of user saved in the SIM card if somebody gets into the area to be monitored.

3. Automatic Video Dial-up Alarm Intrusion: Set the IR switch to Video Dial-up alarm mode. It can automatic video dial-up the number of user saved in the SIM card if somebody gets into the area to be monitored.

4. The power continued to work: built-in lithium battery, the charger from the external power supply, sustainable work about 24 hours or more. (Only for reference, the specific time depending on the network signal location)

5. Built-in light: when the battery voltage is adequate, the device is power on, infrared sensors in work, the device built-in indicator flashes. Users can determine the sated of device such the life of battery, turn on or off, the infrared etc.

Remark:
1. To ensure the normal use of this product, please pre-set switch and infrared work function of the switch position, do not change the switch position if the charger is inserted;
2. The device must works in a good mobile network signal coverage. Don' t place it in a bad field without mobile net work signal coverage such as in a metal box.

Electrical Specifications
SIM Card:WCDMA 3G network
Input power:DC5V/500mA
Normal voltage:3.5-4.2V
Battery capacity: about 600mA
Charge time: 3-5 hours
The distance of IR sensor:1-2 Meter Max;
Work time without charge in: about 24 hours(Following the network signal location)

Troubleshooting
1. How to confirm my device is power on right?
Device can detect the state of power and switch after power on. The device has finished the initialization program for 2 minutes time. (The time is different following actual network conditions. Shake your hands forward the IR sensor, if the led is flashed, it means the device is power on righty in a normal state. Use other phone call this number, after ringing 10 seconds, in normal work state the device will answer the call automatically, else check the Battery, the SIM, or the network.

2. Why does the led can not flash while shake the hand forward the IR sensor after inserting the battery and power on?
Check the power of battery is enough or not. Check the position of power switch. If the batter is empty, please connect the charge for 10 minutes. Disconnect the charger; let the device restore, to do it following the set 5-9 of the use the steps. Else Add the charge time for a longer time or checking and changing the battery;

3.Why does my device can not answer the voice call automatically?
Change the number you call is consistent with the SIM card inside the device or not. Check the SIM is right. Check the device is in the network rightly or not. Check is signal of mobile network is so weak that the device can't work in a normal state.

4.Why dose my device can not answer the voice call automatically?
Change the number you call is consistent with the SIM card inside the device or not. Check the SIM and the network support the video call. Check the device is in the network rightly or not. Check is signal of mobile network is so weak that the device can't work in a normal state.

5. Why does my device can't call-back with IR detected?
Check the power on state is working in a normal state or not. Check the position of IR switch is mode 2 or not. Check the led inside of device can flash or not.

6. Why does my device can work in voice call-back, can' t work in video call-ball?
Check the IR switch is mode 3 or not. Call the device using other mobile phone of 3G WCDMA, check the device is working in a normal state or not. Check the SIM card is enough money to using video call function. Check the signal of WCDMA 3G network is good or not. Check the device has been impacted strongly to let the some connecter is bad inside it. Please send back to fix it by professional team.

7. Why does my device can' t work after set the power switch to "turn on"?
There is more 2 minutes time after power on the device. In this 2 minutes, mustn't change the position of switch. And don' t change the position of switch while charger is connected. If something is happen such as changing position wrong, please following list to do it to help you restore:
(1). Charging for more 10 minutes, Check the led inside the device is flash. If the led can flash, it means the battery is enough power to let the device working in a normal state.

(2) Disconnect the charger ,do it such as the step5-9 of the use the steps.

8. How to charge the battery in power off state of device?
Set the position of power switch to"turn off", connect the charger after 30 seconds;

9. Why does my device can't work after charging a long time?
Some circuit is working still, connect a full power battery on the device, after 1-2 days, the battery' s power will be lost. You can recharge the battery for a normal work. How ever, please take off the battery if you don't use the device.

10. Other question please contact us at sales@3gcamera.com